JUMP TO SOLUTION Solved

Original topic:

UN50KU6300, 2016, screen now has pattern of small white circles

(Topic created: 06-12-2021 12:41 PM)
1047 Views
user83doKVVkOU
Constellation
Options
HD and UHD TVs

UN50KU6300 has now developed a screen matrix pattern of small white circles.   The set was not exposed to any overheating or other conditions that might be an external cause for this.  It appears that this is a very common problem but I haven't found any Samsung recall information.  Also, I haven't found any consistent comments on cause and fix.  Can anyone shed any "light" on the subject?    

1 Solution


Accepted Solutions
Solution
SamsungCaleb
Samsung Moderator
Samsung Moderator
Options
HD and UHD TVs

I understand how this may be frustrating have you tried the following? 

 

Certain models only have an HDMI test after receiving a software update, and older models may not have it at all. If your model does not have this test or is not connected by HDMI, skip to Step 3.

  1. Test the HDMI cable.

    Some TVs have an HDMI cable test. The test is designed for HDMI cables less than 2m long and may not produce good results on longer cords.

    • On 2021 TV models: To perform the test, navigate to Settings. Select Device Care, select Self Diagnosis, and then select HDMI Troubleshooting. Select the HDMI connection you'd like to test, and then follow the instructions on the TV.
    • On previous TV models: To perform the test, make sure the TV's source is still on the HDMI setting for the cable you want to test, and then navigate to Settings. Select Support, select Self Diagnosis, and then select Signal Information. Select HDMI Cable Test, and then select Start Test.

    If the test says the cable is defective, replace the cable. Service is not required.Self Diagnosis selected on a Samsung TV

  2. Test different external devices.

    The final thing to rule out is the external device you're using. Try connecting a different device or using a different Source port. If you were unable to test the HDMI cable in the previous step, try switching out the HDMI cable for another one that is working.

    If the TV can display a picture in any other setup, then the TV is not the cause of the issue. Keep trying various setups until you identify the device or cable that is not working, and then either troubleshoot or replace that particular device or cable.

 

If the troubleshooting steps did not help above then you have a couple of options based on your warranty. 

- If your unit was recently purchased, you can check with your retailer on their return/exchange processes.
- If you have an extended warranty you can reach out to them to have service set up. 
- If you're within the one year warranty, you can Private message me or one of our moderators with your full model and serial number to have service setup
- If you're OUT of warranty, you can use this link below to find a service center in your area. 

https://www.samsung.com/us/support/service/locations/


Be sure to click " ✓ Accept as Solution" when you find an answer that works for you.





Please note, notification emails are a DO NOT REPLY address, you must log-in on the community page in order to respond.

View solution in context

0 Likes
Reply
1 Reply
Solution
SamsungCaleb
Samsung Moderator
Samsung Moderator
Options
HD and UHD TVs

I understand how this may be frustrating have you tried the following? 

 

Certain models only have an HDMI test after receiving a software update, and older models may not have it at all. If your model does not have this test or is not connected by HDMI, skip to Step 3.

  1. Test the HDMI cable.

    Some TVs have an HDMI cable test. The test is designed for HDMI cables less than 2m long and may not produce good results on longer cords.

    • On 2021 TV models: To perform the test, navigate to Settings. Select Device Care, select Self Diagnosis, and then select HDMI Troubleshooting. Select the HDMI connection you'd like to test, and then follow the instructions on the TV.
    • On previous TV models: To perform the test, make sure the TV's source is still on the HDMI setting for the cable you want to test, and then navigate to Settings. Select Support, select Self Diagnosis, and then select Signal Information. Select HDMI Cable Test, and then select Start Test.

    If the test says the cable is defective, replace the cable. Service is not required.Self Diagnosis selected on a Samsung TV

  2. Test different external devices.

    The final thing to rule out is the external device you're using. Try connecting a different device or using a different Source port. If you were unable to test the HDMI cable in the previous step, try switching out the HDMI cable for another one that is working.

    If the TV can display a picture in any other setup, then the TV is not the cause of the issue. Keep trying various setups until you identify the device or cable that is not working, and then either troubleshoot or replace that particular device or cable.

 

If the troubleshooting steps did not help above then you have a couple of options based on your warranty. 

- If your unit was recently purchased, you can check with your retailer on their return/exchange processes.
- If you have an extended warranty you can reach out to them to have service set up. 
- If you're within the one year warranty, you can Private message me or one of our moderators with your full model and serial number to have service setup
- If you're OUT of warranty, you can use this link below to find a service center in your area. 

https://www.samsung.com/us/support/service/locations/


Be sure to click " ✓ Accept as Solution" when you find an answer that works for you.





Please note, notification emails are a DO NOT REPLY address, you must log-in on the community page in order to respond.

0 Likes
Reply