JUMP TO SOLUTION Solved

Original topic:

Samsung series 7 49” won’t connect to wifi

(Topic created: 03-22-2020 01:27 AM)
userEaaLxk5fZb
Constellation
Options
HD and UHD TVs

Just bought the tv yesterday brand new it was ok the first two hours then it disconnected 

 

After that it won't show any wifi to connect to. Not the main one in the living room I brought my router from my room and placed it near the tv and tried my phone hotspot nothing will ahow on the tv to try to connect to and i got error 107 

 

tv came with the latest update and i have read/tried every solution nothing works 

1 Solution


Accepted Solutions
Solution
MsBri1
Neutron Star
Options
HD and UHD TVs

Hello, have you tried changing the channel on the router? Especially in apartment situations, you can have a few routers on the same channel and this can create connection and speed issues. 

 

If your TV won't connect to the internet, you should perform a network status test to help you choose which guide you need. Navigate to Settings > General > Network > Network Status and run the test. Pay close attention to any error messages, and whether there is an X between the TV and the router or between the router and the globe.

 

Important:

  • If the network drops after the TV was off overnight, and you have an RU7 series UHD TV (RU7100 - RU7300 and RU710D - RU730D), try cold booting the TV (hold the power button down on your remote until the TV turns off and then back on). Then you will be able to reconnect to the internet. A software update will be available to fix this issue soon.
  • If at any point you need assistance with configuring settings on your router, contact your ISP if they provided the router, or the manufacturer of the router if it was bought separately.

Check the network status test for an error message.

 

Power cycle your network equipment.

 

Reset the TV.

  • Navigate to Settings > Support > Self Diagnosis > Reset and enter your PIN (the default is 0000). After the reset, try connecting again.

Make sure your Wi-Fi network is compatible with the TV

  • Network requirements vary between TVs and are listed in the user manual. As an example, 2018 models NU6***, NU71**, NU72**, and NU73** only support 2.4Ghz networks. They will not even see a 5Ghz network.

  • If the network is not compatible with the TV, the TV will be unable to see or connect to it.

  • In most cases, the default settings for home networks are fine. However, if the network settings have been adjusted, confirm that they meet the requirements of the TV.

Disconnect some of your other things that are connected to Wi-Fi:

  • The more things you have connected to your Wi-Fi network, the weaker the signal will be. If you have 2 tablets, 3 phones, a refrigerator, and an Xbox, the signal could be very weak. Disconnect all other Wi-Fi devices from the network and then try to connect the TV.
  • If this does the trick when none of the previous steps worked, it means you have more devices connected than your router can handle and you should upgrade your router or connect fewer devices.

 

Try connecting to a different network.

  • This is a troubleshooting step to help determine what the issue might be. For instance, if a mobile device with hotspot functionality is available, have it create a network and try to connect the TV to the hotspot. If any other networks are available, they can be tried as well.
  • Note: If the TV can connect to any other network, service is not required, and the issue is with the network that you're unable to connect to. Contact your ISP if they provided the router, or the manufacturer of the router if it was bought separately.

 

If the issue continues, we recommend contacting your ISP or the manufacturer of your router for further assistance.  If they help you determine the TV as the source of the issue, service may be required. You are welcome to send us a private message with the full model code and serial number in order to see if the unit is within the warranty or if it qualifies for any possible options. Messages can be sent using the following link or by visiting any mod's profile. --> http://bit.ly/33ipYnO

 

 

****The steps above are for the support of US models. If your device is a non-US model please seek a support team in your area by using this link: http://www.samsung.com/visitcountry****


Be sure to click " ✓ Accept as Solution" when you find an answer that works for you.





Please note, notification emails are a DO NOT REPLY address, you must log-in on the community page in order to respond.

View solution in context

0 Likes
Reply
3 Replies
Solution
MsBri1
Neutron Star
Options
HD and UHD TVs

Hello, have you tried changing the channel on the router? Especially in apartment situations, you can have a few routers on the same channel and this can create connection and speed issues. 

 

If your TV won't connect to the internet, you should perform a network status test to help you choose which guide you need. Navigate to Settings > General > Network > Network Status and run the test. Pay close attention to any error messages, and whether there is an X between the TV and the router or between the router and the globe.

 

Important:

  • If the network drops after the TV was off overnight, and you have an RU7 series UHD TV (RU7100 - RU7300 and RU710D - RU730D), try cold booting the TV (hold the power button down on your remote until the TV turns off and then back on). Then you will be able to reconnect to the internet. A software update will be available to fix this issue soon.
  • If at any point you need assistance with configuring settings on your router, contact your ISP if they provided the router, or the manufacturer of the router if it was bought separately.

Check the network status test for an error message.

 

Power cycle your network equipment.

 

Reset the TV.

  • Navigate to Settings > Support > Self Diagnosis > Reset and enter your PIN (the default is 0000). After the reset, try connecting again.

Make sure your Wi-Fi network is compatible with the TV

  • Network requirements vary between TVs and are listed in the user manual. As an example, 2018 models NU6***, NU71**, NU72**, and NU73** only support 2.4Ghz networks. They will not even see a 5Ghz network.

  • If the network is not compatible with the TV, the TV will be unable to see or connect to it.

  • In most cases, the default settings for home networks are fine. However, if the network settings have been adjusted, confirm that they meet the requirements of the TV.

Disconnect some of your other things that are connected to Wi-Fi:

  • The more things you have connected to your Wi-Fi network, the weaker the signal will be. If you have 2 tablets, 3 phones, a refrigerator, and an Xbox, the signal could be very weak. Disconnect all other Wi-Fi devices from the network and then try to connect the TV.
  • If this does the trick when none of the previous steps worked, it means you have more devices connected than your router can handle and you should upgrade your router or connect fewer devices.

 

Try connecting to a different network.

  • This is a troubleshooting step to help determine what the issue might be. For instance, if a mobile device with hotspot functionality is available, have it create a network and try to connect the TV to the hotspot. If any other networks are available, they can be tried as well.
  • Note: If the TV can connect to any other network, service is not required, and the issue is with the network that you're unable to connect to. Contact your ISP if they provided the router, or the manufacturer of the router if it was bought separately.

 

If the issue continues, we recommend contacting your ISP or the manufacturer of your router for further assistance.  If they help you determine the TV as the source of the issue, service may be required. You are welcome to send us a private message with the full model code and serial number in order to see if the unit is within the warranty or if it qualifies for any possible options. Messages can be sent using the following link or by visiting any mod's profile. --> http://bit.ly/33ipYnO

 

 

****The steps above are for the support of US models. If your device is a non-US model please seek a support team in your area by using this link: http://www.samsung.com/visitcountry****


Be sure to click " ✓ Accept as Solution" when you find an answer that works for you.





Please note, notification emails are a DO NOT REPLY address, you must log-in on the community page in order to respond.

0 Likes
Reply
Options
HD and UHD TVs

Try the methods described on this WiFi connection problem fix tutorial. I hope it helps.

0 Likes
Reply
Options
HD and UHD TVs

Try one of these workarounds to solve the problem.

 

https://technastic.com/samsung-smart-tv-error-codes/

0 Likes
Reply