JUMP TO SOLUTION Solved

Original topic:

Dishwasher set LC code and needs to be reset

(Topic created on: 6/30/20 10:51 PM)
userNLUh4WaZKb
Asteroid
Options
Kitchen and Family Hub

My DW7000KM set the code LC.  I've solved that problem.  There is no leak.  The machine kep flashing the LC code and did nothing.  Eventually the machine started pumping itself out.  However the code won't stop flashing.  I need to reset that code and have the machine start once again.  How is that code reset?

102 Replies
SamsungQue
Samsung Moderator
Samsung Moderator
Options
Kitchen and Family Hub

Hello @userNLUh4WaZKb, for any sort of reset we would usually recommend resetting the breaker.

0 Likes
Reply
userNLUh4WaZKb
Asteroid
Options
Kitchen and Family Hub

I unplugged it .... is that the same as a breaker reset?

0 Likes
Reply
userNLUh4WaZKb
Asteroid
Options
Kitchen and Family Hub

Unplugging it an waiting 15 min did not reset the code

0 Likes
Reply
user50tZN1vcD3
Asteroid
Options
Kitchen and Family Hub

i took my sensor and taped it up in the dishwasher, tired of this stupid code error,  then turn power off to dishwasher for a day and all boots up fine, no error code

techie127
Cosmic Ray
Options
Kitchen and Family Hub

All right!

0 Likes
Reply
userNLUh4WaZKb
Asteroid
Options
Kitchen and Family Hub

Just for grins I tripped the breaker, waited a while and then reset it.  That had no effect.  The code is still flashing.

0 Likes
Reply
SamsungQue
Samsung Moderator
Samsung Moderator
Options
Kitchen and Family Hub

Thank you, mind shooting us a message http://bit.ly/2Kp1D5J with the serial number so we can look into service repair options?

0 Likes
Reply
userNLUh4WaZKb
Asteroid
Options
Kitchen and Family Hub

This problem is all over the Internet, you youtube videos how to fix.  You have to remove the machine from the cabinet, remove a side panel, and snake a looooong skinnnny shop vac nozzle (had to make one) to suck out the 0.1 mm deep puddle in the catch pan.  The other option is remove the sensor in the pan that decides the 0.1 mm depe water is a problem.  That will be my next move, if this happens again.  

 

The manual is beyond useless for all the codes.  Providers zero information.  

 

Bottom line is this is a garbage design.  Last Samsung appliance I ever buy.  

userU2dWlVKTHr
Constellation
Options
Kitchen and Family Hub

I am having the same problem. Removed dishwasher, removed pan and bone dry.. Put dishes in after being powered off for awhile and now it is stuck in LC mode again. POS..