cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Constellation

SAMSUNG DW80R5060US

Dishwasher is brand new. Purchased april 2020. This morning, it decides to come on by itself. When we looked into it, code LC is blinking. 

 

 

1 REPLY 1
Highlighted
Samsung Moderator
Samsung Moderator

Re: SAMSUNG DW80R5060US

I'm sorry to hear that, have you tried the following? 

LC, LE  The dishwasher's leak sensor detects moisture or the water reflector is blocked (Waterwall models only). When this code occurs, the dishwasher will turn itself on and will not turn off. During this time it will attempt to drain the water away.

  • If you see a leak, see our guide for Dishwasher leaks water.
  • If you're certain that there is not a leak:
    • If you recently moved the dishwasher, some water may have splashed near the sensor. Give it time to dry. If the noise of the dishwasher is bothersome, unplug it or turn it off at the circuit breaker.
    • If you've recently connected the dishwasher to a garbage disposal, make sure the garbage disposal cap is removed.
    • Make sure the detergent dispenser has not been overfilled or extra detergent added outside of the dispenser.

If you continue to get the error, this will require service. 

- If your unit was recently purchased, you can check with your retailer on their return/exchange processes.

- If you have an extended warranty you can reach out to them to have service processed.

- If you're within the one year warranty, you can Private message me or one of our moderators to have service processed

- If you're OUT of warranty, you can use this link below to find a service center in your area. 

https://www.samsung.com/us/support/service/locations/


Be sure to click " ✓ Accept as Solution" when you find an answer that works for you.





Please note, notification emails are a DO NOT REPLY address, you must log-in on the community page in order to respond.

Reply
Loading...