When my HW-S60D soundbar is connected through a hdmi-connection (eARC) to my 4K QN90F tv, I suffer input issues. In my case, my selected input (HDMI 4 "Gaming") will auto-switch to a different input (HDMI 1) when I have Anynet+ enabled.* E.G. , I select HDMI 4 -> 40 seconds pass -> input auto-switches to HDMI 1.
HDMI 4 is my Xbox Series X gaming console. HMDI 1 is my cable box.
I have power cycled my TV and disconnected/reconnected my soundbar -- which doesn't solve the issue. Anynet+ will work as intended briefly after the aforementioned--then, after the tv has been turned off, or goes into auto power mode/sleep mode, the input issues will start to occur.
My Neo 4K QN90F is updated to the most current firmware.
*Anynet+ must be enabled on my QN90F to enable an eARC connection.
