I purchased a SAMSUNG 970 EVO Plus SSD 2TB - M.2 NVMe Interface Internal Solid State Drive with V-NAND Technology (MZ-V7S2T0B/AM).
I have a Dell Precision 5820 workstation, which does not have M.2 slots, nor does my drive bay have the PCIe backplane. So I installed the SSD in a PCIe slot and used an M.2 NVME to PCIe 3.0 x4 Adapter expansion card.
The source HDD is 1TB, the target SSD is 2TB.
I used Samsung’s data migration tool to clone the SSD.
If the HDD is removed, the SSD will boot the OS and work fine. But once I add the HDD back, the system boots to the HDD instead of the SSD. The HDD is 1TB, and I don’t want to toss it; I want to use it as additional storage.
I went into BIOS and changed the boot order, listing UEFI/my SSD to boot first. However, it still boots to the HDD.
I removed Windows Boot Manager from the boot order entirely. However, it still boots to the HDD.
I press F12 to get a boot menu; I select the SSD. And it still boots to the HDD.
I just want to get the HDD loaded with the SSD as the OS/Boot drive so I can format it with another drive letter and use the space. Any thoughts?
For me, the problem was the EVO 970 flash drive MBR was not allowing UEFI. I converted my MBR to GPT, with no loss of data or anything in about 20 minutes. I edited my bios to UEFI only. All works great, and now my PC is WIN 11 ready. I had to go through the troubleshoot section to get the right command prompt window. I also updated my bios.