cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Samsung Moderator
Samsung Moderator

Re: Powerbot R7040 mapping report

JUMP TO SOLUTION

Thank you for reaching out, when you go to the app store it will be called smart things in the app store.


Be sure to click " ✓ Accept as Solution" when you find an answer that works for you.





Please note, notification emails are a DO NOT REPLY address, you must log-in on the community page in order to respond.

Reply
Loading...
Highlighted
Constellation

Re: Powerbot R7040 mapping report

JUMP TO SOLUTION

I have that. I had it before I had the vaccuum... what do I have to do to get a cleaning report as per the spec on the box?

Reply
Loading...
Highlighted
Samsung Moderator
Samsung Moderator

Re: Powerbot R7040 mapping report

JUMP TO SOLUTION

I apologize for the confusion, when you open the smart things app, there should be three lines at the top left of the app when you press that there should be an option for history close to the bottom and it should show the history.


Be sure to click " ✓ Accept as Solution" when you find an answer that works for you.





Please note, notification emails are a DO NOT REPLY address, you must log-in on the community page in order to respond.

Reply
Loading...
Highlighted
Constellation

Re: Powerbot R7040 mapping report

JUMP TO SOLUTION

@SamsungCaleb I have had this vacuum since 2017 and it is used daily.  When I follow these instructions the history shows "No activities".  I surely wish Samsung would either do as they advertise or change their advertising to reflect the reality of their vacuums.  I am shopping for another robotic vacuum, but Samsung is not on the list of manufacturers I am considering. The battery is dying, the history does not work, the machine almost never finishes a vacuuming, the app is an absolute pain on the occasions that it decides to work. Goodbye, Samsung!

Reply
Loading...
Highlighted
Constellation

Re: Powerbot R7040 mapping report

JUMP TO SOLUTION

Samsung Support - Samsung Connect refers me to the Smarthings app, which I have downloaded and installed and set up.  While it see and communicates with my R7040, it does not show anything in history, despite my having run the vacuum a number of times.  Any suggestions??

Reply
Loading...
Highlighted
Samsung Moderator
Samsung Moderator

Re: Powerbot R7040 mapping report

JUMP TO SOLUTION

I recommend reaching out to our SmartThings team, they can be reached at 866-813-2404







Be sure to click " ✓ Accept as Solution" when you find an answer that works for you.





Please note, notification emails are a DO NOT REPLY address, you must log-in on the community page in order to respond.

Reply
Loading...
Highlighted
Constellation

Re: Powerbot R7040 mapping report

JUMP TO SOLUTION

I only see a history report(map) when I let the Powerbot finish it's task completely on it's own.  If I interrupt it in ANY way, I don't get a report.

Reply
Loading...
Highlighted
Honored Contributor

Re: Powerbot R7040 mapping report

JUMP TO SOLUTION

So we heard back from our specialists and they believe you need to be using Samsung Connect.  If the powerbot purchased was manufactured during or after June 2017, you need to use Samsung connect rather than Smart Home. However, there is no mapping option in the Samsung Connect app, it does the mapping and then stores it internally.   When it finishes vacuuming you can see the ”map” of where it has been by checking the history.  In Device Control either swipe down from the top and pick history (or touch menu in the top right and select history). 


Be sure to click " ✓ Accept as Solution" when you find an answer that works for you.
Please note, notification emails are a DO NOT REPLY address, you must log-in on the community page in order to respond.

Reply
Loading...
Highlighted
Constellation

Re: Powerbot R7040 mapping report

JUMP TO SOLUTION
hello, I just got my powerbot a couple days ago and have been browsing through this text stream to find out how I can get my mapping to work. I have found the same things out that the previous messages have said. and I do see that you have to have Samsung connect for this to work and not Samsung home but our problem is that it was pictured on the box for this device to work with the mapping system and it's not regardless of what system we have to use. will there be an update for Samsung connect to have mapping built in?
Reply
Loading...
Highlighted
Constellation

Re: Powerbot R7040 mapping report

JUMP TO SOLUTION

So I have the same Powerbot and essentially the same issue. It does provide the map in the history section of the Samsung Connect app, but only on occasion. The vacuum does run on a daily schedule but I can't seem to figure out when/why if provides the map output and when/why it wont. I thought this was related to times an error was detected thinking maybe it wouldnt map that but there are times when there is no interruption in reporting that still yields no report. 

Reply
Loading...