cancel
Showing results for 
Search instead for 
Did you mean: 
userDRFAScs7kR
Astronaut

Mold & dirt in washer

We purchased a Samsung washer (model # WA48J7770AP/A2) about 2 years ago. We started noticing black flakes of what looked like dirt on our clothes about 6 months after owning the washer. We have been doing the self-cleaning cycle once a week since purchasing the washer. Nothing seemed to help with the dirt showing up on our clothes. I eventually started taking my work clothes to a dry cleaning place and paying them $$ every week to clean my nice shirts. Today I decided to take apart the washer and figure out what was going on.

 

This is what the bottom of the tub looks like right after running a self-clean cycle

After running self-clean.jpeg

 

 

I removed the cap in the bottom of the tub and removed the bolt under the cap. I was able to remove the bottom part of the tub it just lifted off and to my surprise, it was full of mold!!! Yuck!!!

Mold!.jpeg29286.jpeg29285.jpeg29284.jpeg

 

SAMSUNG, You need to fix this!!

4 REPLIES 4
Quad5Ny
Cosmic Ray

Re: Mold & dirt in washer

Out of curiosity do you wash a lot of organic material off your clothes?  Ex: If you're a baker or whatever.

 

Note: I'm not saying leaving standing water at the bottom of a top loader is the brightest move on their part.

 

 

On your next washer try running a load with bleach and hot water once a week.  Life (mold in this case) finds a way, even in extreme conditions.

Reply
Loading...
userDRFAScs7kR
Astronaut

Re: Mold & dirt in washer

All I wash is normal dress clothes and kids clothes which are never muddy. tried bleach and hot water no luck. Found out that there's a class action law suit I filed a claim. 

Reply
Loading...
Julie3000
Constellation

Re: Mold & dirt in washer

I have the same problem! 

Reply
Loading...
Highlighted
Samsung Moderator
Samsung Moderator

Re: Mold & dirt in washer

Thank you for reaching out to us! Have you tried the following:
To keep your washer tub clean, use the SELF CLEAN cycle at least once a month or every 20 cycles.
Perform the recommended procedures below when using the SELF CLEAN cycle. On 2011–2013 models, the SELF CLEAN cycle is labeled “Pure Cycle.”
Remove all items from the washer tub and ensure the tub is empty. Laundry left in the tub during the SELF CLEAN cycle may be damaged.
Press Power to turn on the washer.
Turn the Cycle Selector to SELF CLEAN (or select Pure Cycle).
Press and hold Start/Pause (Hold to Start).
After the SELF CLEAN cycle, leave the lid open to dry.
The water temperature for SELF CLEAN is set to Hot and cannot be changed.
When noticeable residue is present in the washer tub, add 1 cup (8 fl.oz or 240ml) of liquid chlorine bleach to the bleach compartment before you start the SELF CLEAN cycle.
Do not use or mix any other detergent or chemicals during the SELF CLEAN cycle. If necessary, run a RINSE+SPIN cycle after the SELF CLEAN cycle has completed to help remove any residual residue.
Please be aware that certain usage and environmental conditions may result in residue build-up or odor in the washer tub.
Caution:
Check the washer tub before using the SELF CLEAN cycle. Remove any water remaining in the tub by running the SPIN ONLY cycle before starting the SELF CLEAN cycle.
If there is chlorine bleach left in the washer tub for an extended period of time, rust can occur.
If you have additional questions you can go here: https://www.samsung.com/us/support/troubleshooting/TSG01108629/

Reply
Loading...