Sun
Community stats
- 376 Likes
- 53 Solutions
- 1 Posts
- 163 Comments
- 3 Followers >
- 1 Following >
‎03-11-2023
04:31 AM
Thanks - that was the perfect solution. 😉 Good luck on your current and future adventures!! 😉
... View more
‎02-28-2023
10:43 AM
Set Windows to boot to safe mode. Turned BIOS to AHCI. Booted into safe mode, and let it do it's thing. Removed the safe mode operation, and rebooted into normal windows. Installed the Samsung NVME drivers. Rebooted. Magician has now applied the firmware update.
... View more
alk7mist
Astronaut
in Monitors and Memory
‎02-20-2023 09:29 PM (Last edited ‎02-20-2023 09:44 PM ) in
‎02-20-2023
09:29 PM
>I suspect because i have the drives mapped under VMD but i am not sure. You are correct, that is the issue. Magician simply does not like addressing the drives through RAID/Intel RST/Optane drivers. Unfortunately this update is not one that we can wait on or ignore as the longer we wait, the faster the drive health declines. I recommend you backup your data first, and follow the steps that worked for me: This will only work if you're using a Samsung 990 Pro that is not part of a RAID group. That is, you have VMD enabled in the BIOS, and your M.2 NVMe devices are all single ended (non-RAID devices) If the drive was part of a RAID group I suppose you could disable VMD in the BIOS which effectively temporarily breaks the RAID, but I'm not sure of the consequences of upgrading the firmware, and then reenabling VMD and expecting everything to work with the data being intact. Hence, I would highly recommend having a backup especially if you're dealing with NVMe drives in RAID in case things don't come back together after the update. If the drive is part of a RAID group that's also the bootable OS, I don't see how this would work either because you wouldn't be able to boot the OS anymore once VMD is turned off. In that case you're better off temporarily putting it into a different machine (non-RAID) and upgrade it there. https://scottiestech.info/2022/08/16/how-to-remove-intel-vmd-without-reinstalling-windows Once the drive is back on Standard NVM Express Controller, you'll be able to upgrade the firmware on the Samsung 990 Pro successfully. Opens in new window PDF Download Word Download Excel Download PowerPoint Download Document Download Opens in new window PDF Download Word Download Excel Download PowerPoint Download Document Download
... View more
alk7mist
Astronaut
in Monitors and Memory
‎02-20-2023 09:29 PM (Last edited ‎02-20-2023 09:44 PM ) in
‎02-19-2023
11:08 AM
Hello! Thank you for reaching out! I can see how this can be frustrating with this occurring. I would recommend trying the suggestion from @ddaniel51 first just to verify it's happening on all refresh rates. If it does I would recommend making sure your GPU drivers are up to date. Also, I would recommend making sure you are not using DSR in the Nvidia control panel when selecting your monitor's resolution and refresh rate. After that try turning off G-sync in the control panel also. If none of this works the last thing would be to have service on the monitor, You have a couple of options based on your warranty.
- If your unit was recently purchased, you can check with your retailer on their return/exchange processes. - If you have an extended warranty you can reach out to them to have service set up. - If you're within the one year warranty, you can Private message me or one of our moderators or you can call in directly at 1-800- 726-7864 with your full model and serial number to have service setup - If you're OUT of warranty, you can use this link below to find a service center in your area.
https://www.samsung.com/us/support/service/locations/
... View more
yimi329
Constellation
in Monitors and Memory
‎12-13-2022 12:17 PM (Last edited ‎12-13-2022 12:35 PM ) in
‎12-13-2022
12:17 PM
1 Like
And, if you are using HDMI, you can try to open the quick switch menu (push the menu button to left), then you will see HDMI option is above DisplayPort and selected. if you unplug the HDMI cable or turn off related equipment, now the monitor is black, then turn on another device which is using DisplayPort. Open quick switch menu again, you will see now DisplayPort is above of HDMI, but the monitor still choose HDMI. The monitor has already detected DisplayPort has signal and HDMI doesn't, why not switch signal automatically rather than just resort? Opens in new window PDF Download Word Download Excel Download PowerPoint Download Document Download Opens in new window PDF Download Word Download Excel Download PowerPoint Download Document Download
... View more
yimi329
Constellation
in Monitors and Memory
‎12-13-2022 12:17 PM (Last edited ‎12-13-2022 12:35 PM ) in
‎02-14-2023
02:01 AM
Same here, found any solutions yet Opens in new window PDF Download Word Download Excel Download PowerPoint Download Document Download
... View more
‎02-01-2023
06:25 AM
Don't be lazy, go to NVIDIA.com and look it up yourself. Opens in new window PDF Download Word Download Excel Download PowerPoint Download Document Download
... View more
‎01-23-2023
10:02 AM
Problem solved! Had to select New as the option during windows 11 setup. It made the necessary partitions and the OS worked like a charm... What a relief! Opens in new window PDF Download Word Download Excel Download PowerPoint Download Document Download
... View more
‎01-22-2023
03:01 AM
10 Likes
I believe you should be talking to the Samsung Business Group since the Flip2 is a business oriented device. Us dummys here on the non business Consumer forums haven't a clue. Opens in new window PDF Download Word Download Excel Download PowerPoint Download Document Download
... View more
‎12-26-2022
05:20 PM
10 Likes
The Samsung M5 Smart Monitor does have Apple Airplay compatability. So any Apple device that supports Airplay can connect to the monitor. Most iPads have this built in. If you don't know how to connect the devices you can search up "how to connect iPad to Samsung monitor using Airplay" and there should be a video to help.
... View more
‎12-23-2022
02:08 PM
10 Likes
yes this product is worked, now we can use multiple HDMI Opens in new window PDF Download Word Download Excel Download PowerPoint Download Document Download
... View more
‎12-15-2022
10:02 AM
11 Likes
Due to the age of your monitor a likely scenario is the electrolytic filter capacitors are drying out allowing electrical noise to interfere with the digital signals on the circuit boards. This manifests as random events ocurring in the circuits. Your little square probably being the process most sensitive to the noise. 14 Years of use is very good. Time for a replacement. Opens in new window PDF Download Word Download Excel Download PowerPoint Download Document Download
... View more
‎11-20-2022
09:13 AM
10 Likes
At this time the Ark does not allow for more than one input at a time. There is a work around. You can use Airplay or the windows equivalent to cast your pc to one of the inputs and your console on the other. Hopefully Samsung will have a fix for this soon. Hoping a firmware update, but I'm not sure. Opens in new window PDF Download Word Download Excel Download PowerPoint Download Document Download
... View more
‎10-29-2022
10:46 AM
1 Like
Hi guys, I had the exact same thing happen. Flying at 165 and then knocked down to 120. I had to rollback my NVIDIA drivers to the previous driver as it broke the 165 ability. Immediately it was fixed. I have a 3080ti. I would rollback for now and then try again later! Good luck.
... View more
‎10-29-2022
09:05 AM
10 Likes
Probably an M4 like your user manual indicates in probably an L10 or L12. The M4's that come with the wall mount will likely be ok. Opens in new window PDF Download Word Download Excel Download PowerPoint Download Document Download
... View more
‎10-23-2022
11:21 PM
Hi Thanks for the answer , I am now going to clone the msata to a sata ssd mounted in the computer then reverse that to clone to the nvme ssd Opens in new window PDF Download Word Download Excel Download PowerPoint Download Document Download
... View more
‎10-22-2022
09:19 PM
12 Likes
Since both units operate on the same IR TV codes then locate the IR port on the monitor and cover it with black tape to block the IR signal. Or you could buy a brand of TV that uses a RF(radio frequency) remote and solve the issue that way. That is what I did. 🙂 Opens in new window PDF Download Word Download Excel Download PowerPoint Download Document Download
... View more
‎10-20-2022
02:47 PM
10 Likes
This QB series of digital signage displays are designed and marketed to be used by a business in a closed system as signs and digital information displays, NOT as an end user PC monitor. Administrative access is through the Samsung Partners system. Look up the description and specs of the QB43R on the Samsung sites for more info. Opens in new window PDF Download Word Download Excel Download PowerPoint Download Document Download
... View more
‎10-18-2022
05:46 PM
After running diagnostics and benchmarks I found the 1tb 980 pro drive had an issue with offset/alignment @ 4k cluster, which after fixed, has shown to improved performance closer to advertised speeds... Paragon hard disk manager was used to reset the partition. After a reboot and setup again in Samsung Magician, see the below improved results.
... View more
‎10-14-2022
05:42 AM
10 Likes
Consult the Standard Signal Mode Table in your user manual for the desired resolution/refresh and appropriate signal cable. A DataPort cable may be required. Opens in new window PDF Download Word Download Excel Download PowerPoint Download Document Download
... View more
‎10-10-2022
10:18 AM
10 Likes
Return it to Best Buy while you still can. Opens in new window PDF Download Word Download Excel Download PowerPoint Download Document Download
... View more
‎10-06-2022
09:06 AM
10 Likes
My PC with 960PRO had same problem as described in original post but was resolved by uninstalling Magician v7.2 and then reinstalling it after rebooting computer. Lost all previous Performance benchmark history but small price to pay.
... View more
‎09-29-2022
02:06 PM
Thank you so much for taking the time to reply. This was driving me nuts! I contacted Samsung and they did not have this resolved at that time. I appreciate your help. Opens in new window PDF Download Word Download Excel Download PowerPoint Download Document Download
... View more
‎09-27-2022
09:40 AM
Thanks. The magic must just happen within the external box. I just assumed the standard limitation of HDMI 2.1 would prevent it from reaching 165. Works like a charm though. Opens in new window PDF Download Word Download Excel Download PowerPoint Download Document Download
... View more
‎09-27-2022
01:27 AM
Well, turns out ddaniel51 was right - I plugged my old Full-HD monitor - and the text looks even worse. Seems like I had become so used to the 4K monitor that I thought that's how text always looked like... 🙂 So yeah, I guess it looks the way 2560 x 1440 is supposed to look like. Opens in new window PDF Download Word Download Excel Download PowerPoint Download Document Download
... View more
‎09-03-2022
12:35 PM
10 Likes
Did you plug something else into the wall socket to insure it has power? In the event the wall socket has power you need to check the Samsung power supply for proper output using a volt meter. Did you buy the monitor locally? If so take it back to the store and let them check it. Know any compter geeks that can help you? Do a Google search for monitor troubleshooting. Be daring and learn something new!
... View more
‎08-29-2022
02:28 PM
10 Likes
This is from the Samsung G9 manual resolution tables: "VESA, 2560 x 1440 88.787 59.951 241.500 +/- O O VESA, 2560 x 1440 356.523 240.000 941.222 +/- O O VESA, 3840 x 1080 66.625 59.968 266.500 +/- O O VESA, 3840 x 1080 113.250 99.956 453.000 +/- O O VESA, 3840 x 1080 137.250 119.974 549.000 +/- O O VESA, 5120 x 1440 88.826 59.977 469.000 +/- O O VESA, 5120 x 1440 182.955 119.970 966.000 +/- - O VESA, 5120 x 1440 356.523 240.000 2018.5 +/- - O" Before I go shopping for a high performance monitor I make a list of the features, size, resolutions, and refresh rate I want. If I can't find one to match my wish list then I compromise features etc until a suitable match is found. At this point I look at the capability of my graphics card and computer system to make sure they can support the maximum performance of the chosen monitor. I replace whatever is needed in the system and add the monitor. If a system can't support the monitor in question and is unable to upgrade then the monitor specs need to be downgraded to match the system specs. Spotting a new "shiny" and adding it without doing the pre-purchase homework just creates bad feelings. Firmware can tweak and sometimes add new features but, it cannot rebuild the circuitry in a monitor to do things they were not designed for.
... View more
‎08-22-2022
05:21 AM
Same here - I don't have that setup menu either with the same software update. Perhaps they removed that connectivity with one of the updates. I just did a chat with Samsung support and the rep said a camera is not compatible. Perhaps they removed this capability to encourage sales of the newer M8 monitor with a built-in camera.
... View more
‎08-18-2022
07:30 AM
Use this manual for multiview screen instructions: BN81-22478A-00_e-Manual_M50B_M70B_M80B_NA_LATIN_L04__0513 Available from Samsung Support.
... View more
‎08-17-2022
04:33 PM
10 Likes
Your laptop is a PCIE Gen 1 x 2 device and the 980 requires a PCIE Gen 3 x 4 to operate properly. A new laptop is in your future for the 980 to run at it's designed levels.
... View more
Manage the boards you are following
Nothing to display here yet.
To follow a board, click on "Subscribe" in the "Options" dropdown.
