JUMP TO SOLUTION Solved

Original topic:

2020 75" Q90T HDMI 2.1 with NVIDIA RTX 3080/3090 Flicker & Disconnects

(Topic created: 10-07-2020 10:16 PM)
242079 Views
99xexp
Cosmic Ray
Options
QLED and The Frame TVs

Hey everyone.

 

I wanted to know if anyone else is experiencing problems with achieving 4k 120hz + HDR with the new RTX graphics cards on the current Q80T/Q90T models.

 

With number of feedbacks from a small community on Nvidia including myself, we noticed that enabling Input Signal Plus (or so called HDMI UHD Color) in order to use VRR on Game Mode results in an unstable, flickering state and will not work properly.

 

As a reference, it looks something like this: https://www.youtube.com/watch?v=RBc_qmA3nx4&feature=youtu.be

 

We have tested rigorously through the past week trying out tens of HDMI cables (we know they're not "Certified" HDMI 2.1, but are advertised as Ultra High Speed HDMI with 48gbps output), different resolution+refresh rate settings, and with the last two known updates to Samsung TV firmware (1302, 1402.1) as well. Nvidia also released two driver updates so far however, the problem doesn't seem to resolve at all.

 

Interestingly, Input Signal Plus on other ports besides Port 4 (hdmi 2.1) works perfectly as they should, whether it's connected via hdmi 2.0b or hdmi 2.1 cable (limited bandwidth by the port anyways), with maximum setting of 4k60hz + HDR on 4:2:2 subsampling. The problem occurs as such in the above mentioned video ONLY when Input Signal Plus is enabled for Port 4. You cannot set the resolution higher than 4k60hz without that setting.

 

After numerous attempts at different cable lengths and models, PSU swaps (6pin+6pin on different source), and gathering reports from the community with verified issue on all Samsung TVs, we are inclined to believe that it's likely a firmware / support issue on Samsung QLED and its proper HDMI 2.1 support.

LG CX/C9 also had a similar issue (G-Sync related) but was followed up by their team and was resolved with a firmware update to the LG TVs.

 

I reached out to Samsung via Twitter but was simply told to let Nvidia know lol. Not very helpful so far.

 

If anyone else here have had a similar experience or resolved it on your own, we would love to hear it from you.

 

Thanks!

 

Edit 10/15/2020:

We are aware that the user manual on the TV's only list 2560x1440@120hz or 4k@60hz for VRR as officially supported resolution and refresh rate. However the issue is persistent even when VRR is disabled both either via Game Mode (TV Setting) or Nvidia Control Panel.

tl;dr Port 4 currently has issues even for hdmi 2.1 bandwidth usage.

This is a real rough cut of me showing off the problems I'm having with HDMI 2.1 and a GeForce 3080 on a Samsun q80t that I got for next gen gaming. Sorry about the rambling and just uploading b-roll footage! Just skip around the video and you'll see the different issues and artifacts I'm seeing ...

1 Solution


Accepted Solutions
Solution
Blue Marvel
Asteroid
Options
QLED and The Frame TVs

i have an update on my end hopes it help anyone else in the same positon. I purchased the belkin hdmi 2.1 certified cable from amazon this is the model #AV10175bt2M-BLK, and the flickering went away as soon and i hooked it up to my 3090 to the tv. 

View solution in context

80 Replies
usercRIlVtyLeb
Constellation
Options
QLED and The Frame TVs

Hey! I just wanted to say that I'm having the same issue as discussed in the video. I've tried a couple different 2.1 HDMI cords to no avail. I was also told by Samsung to contact Nvidia despite me thinking this is probably an issue that Samsung would need to fix, lol. Either way, I tweeted at Nvidia Customer Care about this issue just a few minutes ago, and encourage anyone else with this problem to do the same.

Thanks 🙂

psychrage
Cosmic Ray
Options
QLED and The Frame TVs

Can confirm this issue. Even when not messing with VRR(which imo puts a dark sheen over the screen and crushes blacks, so I usually don't use it anyways).

 

I have to physically reconnect the hdmi cable every time I power on my Q90T. If I don't I usually get no display signal, on the rare chance it does handshake, flickering until a physical reconnection of HDMI.

 

I also reached out to Samsung via Twitter and was told to set TV to 60hz and to buzz off and contact Nvidia. Not at all happy by that response.

userGfaRp32c3D
Constellation
Options
QLED and The Frame TVs

Hi there, 

                   I'm having a similar issue with hdmi2.1 running at 120hz from my Xbox series x. I was told by Samsung that the new 1403.1 firmware would fix it but after updating I still have an issue with either a corrupted image or the screen constantly flickering on and off. As soon as I adjust my Xbox setting back to 60hz the issue stops. I am using a high speed hdmi2.1 cable plugged into the hdmi2.1  port 4. I hope they come out with a fix for this soon

0 Likes
Reply
userGfaRp32c3D
Constellation
Options
QLED and The Frame TVs

I have found that after installing the 1403 firmware update the issue now only happens when game mode is set to "Auto game mode". When Turing auto game mode off and selecting game mode on. I have no issues with running 120hz at 4K using the Xbox series x. Hope this helps someone. 

0 Likes
Reply
CJx
Cosmic Ray
Options
QLED and The Frame TVs

I can also confirm issues relating to using VRR with Nvidia on the RTX 2080Ti on a Q95T.
When Using VRR 'shadows' in dark areas become overblown and actually highlight.

When activating Nvidia's G-Sync it does say that it is not validated as compatible and I belive similar issues happened with earlier Freesync monitors when they first entered the market.

I have tested over a few nights, multiple resolutions, Hz rates, HDR on/off, colour bit depth, TV modes and have always found this issue repeatable everytime with VRR as the main cause. Hoping to hear more news on this soon. Will keep an eye on it for sure.

 

Edit: I also tested an Xbox one X, using AMD freesynd to see if the issue was an overall HDMI issue/TV issue and it is not. Using Xbox one X freesync I was able to play some very dark areas that appeared perfect in picture with VRR on.

Stepping and overblown blacksStepping and overblown blacksNo such issues and smooth blacks when VRR offNo such issues and smooth blacks when VRR offVRR on. Using Chaos Theory as a dark test area we can see shadowed parts of Sam overblown. This does not occur with VRR off.VRR on. Using Chaos Theory as a dark test area we can see shadowed parts of Sam overblown. This does not occur with VRR off.

 

EDIT: This problem if still occurring can sometimes be corrected by adjusting the digital vibrancy slider in the NVIDIA control panel by + or - 1. If you have this problem see if this works for you.

userIZJMpp129T
Asteroid
Options
QLED and The Frame TVs

I have been Googling since getting the rtx 3090 and the 55" Q80t about this problem. 

I bought two expensive hdmi cables that could do 48gbps and the first one caused flickering so hard I couldn't bear it. The second was pretty bad too, this is all only after turning input signal plus on so I can get 120hz.

I spent at least 3 hours with support trying to sort this out, until finally I just used my hdmi2.0 cable which much have been 2.0b. As it instantly worked with 120hz, and I also found that it was 4:4:4 chroma or whatever, but HDR doesn't seem to work. 

Anyway, I have another cable arriving in the mail on Monday hopefully... and I will try that out, but now it seems like a firmware problem and Samsung need to help us out!

0 Likes
Reply
99xexp
Cosmic Ray
Options
QLED and The Frame TVs

Welcome to the club!

 

Yeah - after talking to many others, getting different HDMI cable is pretty much futile at this point unfortunately. We have more than 10-15+ cables already tested from various vendors on Amazon and others - to which some of the cables performed "better", but eventually they all produced similar issues.

 

I am also back to using 2.0b...hope Samsung or Nvidia makes a note of this 😞

userIZJMpp129T
Asteroid
Options
QLED and The Frame TVs

Well if this continues, I still have warranty on the TV. And this must be covered...

I have bought a Pacroban cable as someone recommended it, but you're making me feel a bit hopeless. 

Also, do you still get very little flickering with the hdmi2.0b? I get a flicker every 5 minutes or so. 

99xexp
Cosmic Ray
Options
QLED and The Frame TVs

I don't personally see any flickers using hdmi 2.0b cables, but ONLY if I'm connected to other remaining ports (1,2, or 3). Using Port 4 for any bandwidth or cables seem to cause the flickering issue.

 

Yeah, it's a shame the way it is as we haven't heard any updates regarding this. Even an acknowledgement would be great from either Nvidia or Samsung...

0 Likes
Reply