Programming change: camera settings

[userwmt41eOWga]

It would be nice if we could change the setting on the camera for hyperlapse. Such as the duration between photos. Ie one photo a minute rather than every 3 seconds

[LongHiker]

@userwmt41eOWga Have you tried changing the rate in hyperlapse?

Open the Hyperlapse camera. Click the Auto in the upper right. If you set this to 60X, the camera will capture 60 seconds (1 minute) to create 1 second of output. 

[userwmt41eOWga]

I have only rarely used the hyperlapse before. Did not know settings could be changed. The solution worked, sort of, so I'm happy.

[BCK420]

I'm sure there is a way to change it.

[userwmt41eOWga]

Yes, but it still takes one frame every 2-3 sec just plas it back faster. Hour long recording will take up lots memory.

[LongHiker]

@userwmt41eOWga It needs that information to provide fluid motion for the items in view. You may want to look at Stop motion apps instead of using hyperlapse. 

[userwmt41eOWga]

That does make the most sense for a the very slow time lapse action. Something that takes hours to complete.