Hello, I have read the manual and went through all setup but for the life of me cannot determine how to make my family hub display screen go dark at night. It lights up the whole house. Any tips or suggestions for screen saver or display time out greatly appreciated.
Hello! Thank you for reaching out! I would recommend trying the following below if this doesn't work then this option is not available on your model.
You can first try Going to Settings > Display > Screen Timeout and set a shorter timeout. Or you can try Settings > Display > Night Mode or Settings > Power Saving > Night Mode to adjust brightness or set nighttime hours.
Be sure to click " ✓ Accept as Solution" when you find an answer that works for you.
Please note, notification emails are a DO NOT REPLY address, you must log-in on the community page in order to respond.
Hello! Thank you for reaching out! I would recommend trying the following below if this doesn't work then this option is not available on your model.
You can first try Going to Settings > Display > Screen Timeout and set a shorter timeout. Or you can try Settings > Display > Night Mode or Settings > Power Saving > Night Mode to adjust brightness or set nighttime hours.
Be sure to click " ✓ Accept as Solution" when you find an answer that works for you.
Please note, notification emails are a DO NOT REPLY address, you must log-in on the community page in order to respond.
