Original topic:

Adaptive Volume setting

(Topic created: 08-13-2023 11:29 AM)
4153 Views
Hakata
Constellation
Options
QLED and The Frame TVs

I have a Samsung QN90C TV, a Samsung K360 Soundbar (SB), and a Samsung SMT-H3362 Set Top Box (STB) (the cable provider is Spectrum).  

The STB is connected to the TV via an HDMI cable.  I’ve used both Bluetooth and Optical Cable to connect the TV to the SB which work. 

While the connection to the SB works, the QN90C's Adaptive Volume feature does not work.  The manual states that this function is only available when the sound output of the TV is set to TV Speaker. I would like to use the SB for the improved audio experience. So …. is there a work around for leveling the volume as I move from channel to channel on the STB?

0 Likes
Reply
5 Replies
Options
QLED and The Frame TVs
Adaptive sounds works both on the sb and thru the tv. If you select the soundbar as the output in the menu then scroll right till you see sound mode you can change it from surround, standard, and adaptive. This feature may not work if you have sb set to q symphony which uses both outputs to enrich the sound. Sound output should show whether the tv is the output or the soundbar. This functio. May not work if the sound is being connected thru spdif. It may require the Earc hdmi connection. Maybe
Options
QLED and The Frame TVs
Here's some examples20230813_113205_1000001951_1691951527.jpg20230813_113141_1000001950_1691951503.jpg20230813_113140_1000001949_1691951502.jpg20230813_113137_1000001948_1691951499.jpg
0 Likes
Reply
Options
QLED and The Frame TVs
Some more examples20230813_113128_1000001947_1691951490.jpg20230813_113126_1000001946_1691951487.jpg20230813_113119_1000001945_1691951481.jpg20230813_113059_1000001944_1691951460.jpg
0 Likes
Reply
Options
QLED and The Frame TVs
Last example.20230813_113041_1000001943_1691951444.jpg
0 Likes
Reply
Solution
Hakata
Constellation
Options
QLED and The Frame TVs

JustWorkForOnce thanks for the get back. The UI on my QN90 is different than the one in your pictures but your response gave me some hints and prompted me to look further. After some fiddling, I got the QN90C's Adaptive Volume feature working with my K360 Soundbar (SB). Here’s what I did

On the QN90C

  • Set the Sound Output device to TV Speaker
  • Set the Auto Volume to ON
  • Set the Sound Output device to K360 SB (Bluetooth)

I’m assuming that setting the Sound Output device to TV Speaker was key. When I started on this adventure the Sound Output device was set to K360 SB (Bluetooth) and the Auto Volume option was OFF. It was also “grayed out” so that I could not reset it. Once I changed the Sound Output device to TV Speaker, I was able to change the Auto Volume option to ON. That setting stuck after I changed the Sound Output device back to K360 SB (Bluetooth).

Some vituals on the TV

  • Model QN55QN90CAFXZA
  • Software Version:  T-PTMCAKUS-1212.7, E0301500,  BT-S

AutoVolume.jpg

0 Likes
Reply