Recently started increasing time on sensor dry. Initial time get's down to 1 minute, time increase to 9, gets down to 1 minute, time increases to 7, gets down to 1 minute, time increases to 36 minutes. Each test I perform, the time increases are a bit different, but the process is similar. The clothes are not dry though when time increases. I this normal behavior? It seems like it's taking longer to dry on the sensor dry, bit honestly, I never paid attention.
I ran a vent blockage test, all clear. Then ran a diagnostic, and received a a 0T code. (letter O or Number 0?). In the list of error codes I only see t# error listed, are these the errors I am looking for? t0=temperature error
I'm sorry that you are experiencing problems with your dryer, It seems that the error code refers to a temperature sensor or dirty lint sensor and a possible vent blockage, but since you checked the Vent, it could be something else, Below is a link to Support documents for your Dryer, If these recommendations don't remedy the problem, please contact Samsung Support directly to see if they have any additional troubleshooting information, Their number is +1 800-726-7864
TY user_ams007, my main question is the error code 0t the same as error code t0? There are no errors code listed in the support site that start with a 0.
