Hi. I got recently this monitor: Samsung QLED 49" Odyssey G9 C49G95TSSR 1ms 240Hz
On personal computer i have set it to 240 hz (settings in the monitor menu) However, when i try changing the refresh rate to 120 / 240 hz the monitor goes blank.
So how else do i operate on 240 hz?
I have geforce 3070 Ti and DP 1.2 cable 5m long.
I also notice that sometimes when playing a game the video flinches and I get the notification in top left corner of DP connection (as if the cable was loosing signal).
1 - Up to 4k 12-bit HDR at 240Hz with DP1.4a+DSC. Up to 8k 12-bit HDR at 60Hz with DP 1.4a+DSC or HDMI2.1+DSC. With dual DP1.4a+DSC, up to 8K HDR at 120Hz
2 - Supports 4K 120Hz HDR, 8K 60Hz HDR and Variable Refresh Rate as specified in HDMI 2.1
3 - DisplayPort 1.4a
4 - Requirement is made based on PC configured with an Intel Core i9-10900K processor. A lower power rating may work depending on system configuration.
Note: The above specifications represent this GPU as incorporated into NVIDIA's reference graphics card design. Clock specifications apply while gaming with medium to full GPU utilization. Graphics card specifications may vary by add-in-card manufacturer. Please refer to the add-in-card manufacturers' website for actual shipping specifications.
somehow you found what specification my GF card has.
Can you find those details for t2000 geforce? its a quadro card. Cos im using this monitor also for work, and im not sure if getting new cable (HDMI 2.1) has any merit to it.
