Samsung Q990D connected to LG C1 display via eARC. Problem has presented itself with both Apple TV and Sky Stream box (and indeed internal apps on the C1).
Have tried 3 different cables on the eARC.
1/5 - 1/10 times the soundbar will power on with the TV as normal, be volume adjustable on the display via the TV, however will have no sound. This continues if I try and cast to the soundbar, play via bluetooth etc, so presumably is not a format issue from the TV.
To resolve the issue, I need to power off and power on the bar using the remote, at which point it works.
Have tried a reset to defaults. Is anyone else having this issue and is there a resolution? On FW 1016.
Hello! Thank you for reaching out! This does sound kinda strange with your soundbar not having sound all the time. I would recommend attem,ping a factory reset on the soundbar. To do that, please try the following below,
1. Turn on the soundbar.
2. Press and hold the power button on the soundbar for approximately 10 seconds.
3. Release the button when you see "INT" displayed on the soundbar or observe a blinking red light. 4. Wait for the soundbar to restart and complete the reset process.
I can confirm factory resetting does not work. A simple google search shows this being a widespread issue.
In my case My Q990D is hooked to my LG c4 TV via eArc. When I power on the TV with LG remote the bar does turn on; however, most times there is no sound. You have to use the Smasung Q990D remote and cycle the inputs and eventually it will start playing the audio.
I find this unacceptable and appears to happen to anyone not using a Samsung TV. Any ideas? Bothe Sound Bar and TV are on latest firmware; I am using the HDMI cable supplied with the bar and the TV has CEC enable and whether I choose pass through, or auto, it makes no difference.
