cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Constellation

No drive health and temperautre detected on samsung magician for Samsung SSD 970 evo plus

JUMP TO SOLUTION

Hi there,

 

I just installed a new samsung SSD 970 evo plus 1TB. It works properly. However, when I check it with Samsung magician, there are several issues.

 

1. No drive health and temperature detected. Showed as N/A.

2. It cannot recognize by diagnostic scan,

3, It cannot apply the performence optimization.

Please see the attached picuture. Thank you very much for your help and have a good day!Capture1.PNGCapture2.PNGCapture3.PNG

1 SOLUTION

Accepted Solutions
Highlighted

Re: No drive health and temperautre detected on samsung magician for Samsung SSD 970 evo plus

JUMP TO SOLUTION

Hello userxEFvjuOvWE,

 

How is the 970 EVO Plus drive connected exactly?
The Samsung Magician needs the following to work properly with the m.2 NVME drives.

 

1. Drive must be connected directly into the motherboard's M.2 slot. (The slot must have support PCIe 3.0 and NVMe)

2. The BIOS storage mode must be AHCI. (Check this with your computer manufacturer in your computer's BIOS settings)

3. The Samsung NVME Driver must already be installed in the computer (This driver also requires the BIOS to be set to AHCI)

4. Make sure the Windows Device Manager is also seeing the drive properly under the category "disk drives"

View solution in original post

Reply
Loading...
2 REPLIES 2
Highlighted

Re: No drive health and temperautre detected on samsung magician for Samsung SSD 970 evo plus

JUMP TO SOLUTION

Hello userxEFvjuOvWE,

 

How is the 970 EVO Plus drive connected exactly?
The Samsung Magician needs the following to work properly with the m.2 NVME drives.

 

1. Drive must be connected directly into the motherboard's M.2 slot. (The slot must have support PCIe 3.0 and NVMe)

2. The BIOS storage mode must be AHCI. (Check this with your computer manufacturer in your computer's BIOS settings)

3. The Samsung NVME Driver must already be installed in the computer (This driver also requires the BIOS to be set to AHCI)

4. Make sure the Windows Device Manager is also seeing the drive properly under the category "disk drives"

View solution in original post

Reply
Loading...
Highlighted
Constellation

Re: No drive health and temperautre detected on samsung magician for Samsung SSD 970 evo plus

JUMP TO SOLUTION

Thank you very much for your help! After I set bios to AHCI, the Samsung magician can verify the new SSD.

Reply
Loading...