we recently bought a samsung FR261BEAESR Regrigerator. The freezer is located on the bottom in the form of a drawer. WHen you open the drawer you hear the ice being scraped from the top of the ice compartment and pushed out the back side of the drawer; then you hear the ice drop and fall to the bottom of the refrigerator under the drawer. You can not get to ice because the drawer is not easily removed. You can see the ice build up and evently being pushed out because the ice eventually is being pushed by other ice. Imagine the coin game where you drop a penny in and hope it pushes other coins out of the machice. When we open the freezer sometimes the ice that falls pushes the ice that has previously fallen out onto my kitchen floor approximately one inch under my frig. Please help me with a solution. I can send a video if that would help you visualize what is happening.
1 SOLUTION
Accepted Solutions
It sounds like the ice maker is making too much ice. Our ice makers are designed to stop when they're full.
- There are two methods for this, depending on which type of ice maker your model has.
- Either an optical sensor detects when ice has piled too high, or a mechanical arm is pushed upwards when the ice piles high enough. If your ice maker won't stop making ice, this system isn't working.
If your ice maker is making too much ice, it's possible that the ice bucket is not inserted correctly.
- This allows ice to spill out of the bucket before it piles high enough to be detected by the ice maker.
- Make sure your ice bucket is inserted correctly.
- You can refer to illustrations in your user manual if needed.
Once you have confirmed that the ice bucket is inserted correctly, reset the ice maker. Resetting the ice maker will re-initialize it, which can potentially resolve issues with your ice production.
Reset the ice maker:
If the above troubleshooting steps didn't help you are welcome to send me a private message with the full model code and serial number in order to see if the unit is within the warranty or if it qualifies for any possible options. Messages can be sent using the following link or by visiting any mod's profile. --> http://bit.ly/33ipYnO
It sounds like the ice maker is making too much ice. Our ice makers are designed to stop when they're full.
- There are two methods for this, depending on which type of ice maker your model has.
- Either an optical sensor detects when ice has piled too high, or a mechanical arm is pushed upwards when the ice piles high enough. If your ice maker won't stop making ice, this system isn't working.
If your ice maker is making too much ice, it's possible that the ice bucket is not inserted correctly.
- This allows ice to spill out of the bucket before it piles high enough to be detected by the ice maker.
- Make sure your ice bucket is inserted correctly.
- You can refer to illustrations in your user manual if needed.
Once you have confirmed that the ice bucket is inserted correctly, reset the ice maker. Resetting the ice maker will re-initialize it, which can potentially resolve issues with your ice production.
Reset the ice maker:
If the above troubleshooting steps didn't help you are welcome to send me a private message with the full model code and serial number in order to see if the unit is within the warranty or if it qualifies for any possible options. Messages can be sent using the following link or by visiting any mod's profile. --> http://bit.ly/33ipYnO
