Same problem here. Once the washer hits the 11-15 min mark it bangs, goes back up to 22 min and fills back up with water again, spins until 11-15 min, then back to 22 min.....and repeat, repeat, repeat. Only one in instance I received a "dc" error but all other times I dont get an error. The timer just goes into the endless fill-spin-fill-spin loop. I have recalibrated it, the machine is level, and it is not overloaded with clothes. I redistribute the weight of the load multiple times but it never helps. Lately I end up having to babysit the machine and stop it before the next repeated fill cycle at 15 min and then hand wring the clothes out, defeating the purpose of the machine!!!!! Then of course the dryer cycle goes twice longer because the clothes are still soaked as I can only wring out so much. So incredibly frustrated by the poor quality of this brand and machine and disappointed by this seemingly widespread issue that has gotten zero attention from Samsung. Cant wait to buy another brand and stay away from Samsung forever.
model WA400PJHDWR/AA 01
We are having the same problem. I can't get a service person to come and work on Samsungs within 60 miles of where I purchased it. Frustrated and will not buy another Samsung!
We bought our machine in 2012 and it has recently started having the same issue with repeated fill / drain cycles. When it starts spinning, it either gets unbalanced and stops with the dc error (regardless of load size) or it refills with water and starts over.
It also has developed the severe rust issue around the bleach dispenser that others have reported, which makes me wonder if the two issues are related. Such a pricy machine should not have these problems requiring repeated service calls. I will not buy another Samsung.
My washer is also repeating the rinse cycle. Help
When I start a load my washer will either repeat the wash cycle or repeat the spin cycle. If it does it when it is at the wash cycle it adds the water and then my washer will beep and then drain the water and add new water. For the spin cycle it will add water and never get to where it actually spins, it will drain the water and continue to add water. It was only doing this once in a while now it is every load. I have only had this washer for four years. I would like to know what to do to fix this problem. It seems like a lot of people are having similar problems with their washers.
I'm hoping to get some help on this for my in-laws. Please respond if someone is currently moderating this discussion. Model No. is: WA400PJHDWR/AA and Serial No. is: <Hidden>.
Many thanks in advance.
Our recommendation would be to follow the steps in the accepted solution to send us a private message.